See Details

Buy 3 Tires, Get 4th Tire Free Instantly

Close (X)

Buy 3 Tires, Get 4th Tire Free Instantly
Buy 3 Tires, Get 4th Tire Free Instantly. Receive a discount equal to the price of a single tire when four tires are added to the cart. Valid on select in stock tires only. Those tires for which discount is available will be identified in search results & product detail pages. All other tires and special order tires are excluded from this offer. Valid when scheduled for installation on and installation is completed between 6/25/18 through 7/31/18.

ProStop Brake Wear Sensor 94658
Zoom [+]
  • Part #: 10031|
  • SKU: 94658

Available today

Pay in Store Available

    • Designed to be a direct OE replacement providing OE quality fit, form, and function.
    • Manufactured using advanced quality materials to provide both durability and reliability.

ProStop Brake Wear Sensor

ProStop Brake Wear Sensors are a direct, original equipment replacement brake sensor for vehicles that include this feature. They are used to warn the vehicle operator that the brake pad is in need of replacement. The sensors cannot be re-used once the brake warning light Illuminates and must be replaced in order to keep the vehicle's diagnostic system functioning properly.
  • Designed to be a direct OE replacement providing OE quality fit, form, and function.
  • Manufactured using advanced quality materials to provide both durability and reliability.
  • Sensor heads are made from high heat resistant phenolic resin, creating a heat resistant barrier up to 290 degrees centigrade.
  • German Leoni produced cable wire with silver coating that offers superior signal connectivity.
  • Tyco produced premium connector pins that are silver coated to provide superior anti oxidation protection while maintaining uninterrupted connectivity.
  • Original Equipment cable lengths and clip holder locations for fit and performance.
DMA Goodpoint supplies one of the most complete lines of brake wear sensors for the automotive aftermarket parts industry. Starting with a benchmark of OE fit, function, and engineering, their design and material specifications surpass many of the top brand names in the industry.

Download Brochure
Wire Length (in)
Wire Length (mm)
Key Vehicle Manufacturer Application
User friendly design
Easily installed by plugging in to the sensor leads and the back of the pad.
OEM Cross Reference Part Number
Vehicle Manufacturer


ProStop Brake Wear Sensor is rated 3.7 out of 5 by 7.
Rated 5 out of 5 by from Correct fit now just go on line to see how to Fit same as oem . You will need to reset computer tracking on the dash to reset the brake light and mileage . Just go on line with your car and put the info how to reset brake light. The youtube video will walk you through it...
Date published: 2016-12-20
Rated 1 out of 5 by from Pep Boys sent the Wrong Sensor The recommended sensor listed on your website for my vehicle was incorrect. I did not know this until I tried to plug in the electrical connector and found it used 2 pins but the vehicle only allows for a single pin connection. Additionally, the worn-out sensor on the vehicle had a probe like a finger that goes into a hole in the brake pad. The recommended sensor did not. I took it back to the store and the parts man found, in the box of sensors, the correct one. However, the model numbers on THAT sensor and in his reference guide did not indicate it would fit my vehicle, although it did, perfectly.
Date published: 2016-11-25
Rated 4 out of 5 by from Nice product. Easy to install Maybe they should come as a single piece though? I only did rear brakes and have one left over...
Date published: 2015-04-17
Rated 5 out of 5 by from good product Fit perfect.
Date published: 2015-01-08
Rated 1 out of 5 by from Horrible - should be discontinued These brakes are the worse. They squeal all the time. The paperwork said they may squeal. It should have said "will". I am going to change them out as soon as the weather breaks.
Date published: 2014-03-27
Rated 5 out of 5 by from Pain to install, but worth the hassle First time I have ever had a car with wear sensors. I am used to the metal grinding on the rotor then you know it is time to change. The car manufacture, of course, wired it in such a way that you have to take about 20 min taking your car apart to find were it is plugged in. Overall after doing the rear of the car, the front was much easier.
Date published: 2014-01-07
Rated 5 out of 5 by from Great product, good value! I purchased this product for a MBZ 560 SL. I was a perfect fit and works well.
Date published: 2013-11-10
  • y_2017, m_3, d_5, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_94658, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_pepboys
PayPal available for online purchases. Major credit cards accepted online and in store. Pay online, in-store or take advantage of our Pep Boys credit card. Learn more and see additional details in cart.