Rated 5 out of 5 by Silverado Had to sent part back. ( I ordered wrong part )
I ordered 2 wheel bearing hub assemblies and didn't understand that there were 2 different speed sensor cables for my 2007 Silverado until after I had installed one.I couldn't return the one I had already installed, but sent back the other one. Pep Boys let me print a pre-payed return mailing slip from their web site and took back the one and returned my money.I would not hesitate to order from them again.
November 18, 2014
Rated 5 out of 5 by Chief273 Excellent value
Perfect fit for replacement.
Was best value I found.
November 15, 2014
Rated 5 out of 5 by Asbestos 2006 Silverado
ordered part, picked up part, installed part. was that easy.
November 8, 2014
Rated 4 out of 5 by Junito It Good
Its a great item but i was seen to the front part.
October 22, 2014
Rated 5 out of 5 by Butch525 Did the job
This was by far the best price I could find, the additional 25% off for ordering online was an added bonus. The parts were as described and seem to be well made. I had no issues part related in the installation. I have had them on for about 1500 miles and no issues so far. I couldn't find warranty information in the description on line but the store clerk said it was 1 year. Overall I'm happy with the product.
October 15, 2014
Rated 5 out of 5 by rocco1 great service !!!
I ordered the wrong part number they replaced the product quickly the parts were excellent quality and came with bolts.
October 3, 2014
Rated 5 out of 5 by Espec Fitment was great, price is the best part, so far so good.
Dealer quoted me $150 for part, found it here for so much less! Instock at store, easy install, fits perfect.
September 17, 2014
Rated 3 out of 5 by tbowlen So far, so good!
It's only been a few weeks, but the partseems to be as good as any I have used (4 over 11 years with my GMC 1/2 ton).
August 16, 2014
Rated 5 out of 5 by charlessant Fit perfectly
Easy to replace. Hub and sensor wire exactly as original.
August 16, 2014
Rated 1 out of 5
by advocate Hub Bearing problem
ProLine Hub Bearing CBR930246 Holes were threaded incorrectly in hub bearing face for rotor attachment bolts. "Wrong thread pitch" It was too late as I had already installed the half shaft and torqued everything when I found out so I rethreaded (tapped) the holes in place on the ProLine hub bearing face myself to the correct M6x1.0 thread rather than completely removing the hub bearing again (major work) to swap it out.
April 20, 2014
Rated 5 out of 5 by peewee It is a very good product.
Its a good product.But I didt need it
March 17, 2014
Rated 5 out of 5 by KnuckleBuster Perfect Fit!!!
Hub assembly fit perfectly just like OEM. No problems at all with the installation. I would buy another. Just hope it lasts a while.
February 21, 2014
Rated 5 out of 5 by Chuckles product worked as expected
Product has performed as expected. No problem with installation and function. Excellent overall.
December 26, 2013
Rated 5 out of 5 by Mac49 Proline Complete Wheel Hub Assembly
What can I say... the part was well made and finished. The fit better then stock and more robust. Went ahead an replaced the other the following day.
December 21, 2013
Rated 5 out of 5 by JimC Great deal
I bought this hub assembly for so much less than the garage was asking for it, in town. And it was easy to put on and so far is working great.
October 29, 2013
Rated 4 out of 5 by MisterBry Seems like a fine replacement bearing.
Overall the packaging, appearance and performance of this replacement bearing is very high quality. The installation and fit of the part was a perfect match to the OEM part. At the time of this writing, the bearing has been in place for 22 days and used daily, performance is flawless.
The one negative comment I have is the plastic retaining clip that holds the ABS connector to the strut broke during installation. There are two angled pieces of plastic in the shape of an “arrow” that retain the connector, one side snapped off while adjusting it to catch strut stay. If the manufacturer could use a little less brittle plastic for that clip it would have been perfect. In place of the clip I used two small zip ties to cross lash connector to the strut stay.
I'm giving "Durability" an excellent rating, but as I said the bearing has been in place for only 22 days and I will expect it to last years.
October 22, 2013
Rated 4 out of 5 by Rosebud My mechanic said it was a good part & brand.
I didn't install this part, my mechanic did and he was pleased.
September 27, 2013
Rated 5 out of 5 by HubBearing Fit like a glove
This was a perfect replacement for my 2004 trailblazer. It was easy to swap out and included the antilock wire.
September 2, 2013
Rated 5 out of 5 by KittyKat1950 hub assembly
I was very happy with the service I got from Pep Boys, will be ordering all my parts on line.
August 15, 2013
Rated 4 out of 5 by Luis Pep Boys prices
Over the last couple of months my 2004 GMC Envoy has been coming up with some problems. I have had to look up about 6 items and each time Pep Boys has beat everyone elses price, plus the online ordering and their customer service has been great! Thanks Guys!
August 5, 2013
Rated 2 out of 5 by tsmith 1 of 2 items used and not the correct item
Purchased 2 of the Proline Complete Wheel Hub Assembly units online. Great price and it arrived at the store the next day. I picked up the parts and took them to a mechanic to install. While my van was in the air ready for the new hub assemblies, the mechanic found one of them to be used and the wrong size. Fortunately, another Pep Boys had the unit in stock and delivered it to the shop in less than 2 hours. I'm shocked that they would sell a used & incorrect part (box was correct) but happy Pep Boys made it right.
March 25, 2013