Rated 3.7 out of 5 by 15
Rated 1 out of 5 by cyberron Integra Distributor Cap
The BWD distributor cap isn't manufactured properly to fit the Integra distributor. The spring loaded post that inserts into the coil doesn't retract far enough. So the cap won't seat on the distributor. Another brand fit perfectly as did the one being replaced.
September 5, 2015
Rated 4 out of 5 by ShadeTreeJohn Perfect fit
Cap was a direct replacment with no fitment issues. I installed a new distributer cap as part of simple tune up on my diaghter's 99 Honda CRV along with spark plus and a rotor. The car runs much better.
Price was good becuase of the 35% discount for online purchases along with the free shipping.
July 8, 2015
Rated 4 out of 5 by Terrytui Said to be better material version
Fixed P0300 multiple misfire, the old cap ( I think it was a cheap one that come with the car) last only a few month before the spark found it ways between the terminals internally.
April 20, 2015
Rated 4 out of 5 by ASE1 This product is good
This product is good
March 30, 2015
Rated 4 out of 5 by Dmaninfwtx stock cap
good stock cap
November 24, 2014
Rated 5 out of 5 by RobD First time
Never changed a cap before but it was very easy the retaining screws were weird but normal i guess. Its a screw head long shaft and a hook on the end. When you place the cap right and turn the head the hook hooks under the slot and locks the cap in place. Dont forget to use dielectric and know your firing order.
February 14, 2014
Rated 1 out of 5 by f4plt Problematic
The attachment screws accompanying this cap are coated with some sort of locking compound. The compound makes it difficult to torque the screws. Additionally, the screws seem to be either too long or of an incorrect diameter -- they would not seat the cap on my OEM distributor. The combination of all the above resulted in the distributor boss cracking while trying to seat the cap. Costing me a new distributor. I am an experienced mechanic, this should not have occurred. Not recommended.
April 11, 2013