See Details*

Buy 4 Select Tires, Get 30% Off Instantly

Close (X)

Buy 4 Select Tires, Get 30% Off Instantly
Receive 30% Off 4 Select Installed Tires on Your Online Purchase. This offer is valid only on PepBoys.com and is an online exclusive. Promotion not valid for walk in customers to a Pep Boys store. Customers will need to place your order and schedule installation on PepBoys.com to qualify. Valid on select in stock tires only and requires Pep Boys Installation package and Road Hazard Warranty to receive the discount. Those tires for which discount is available will be identified in search results and tire detail pages. All other Tires, Michelin branded, BF Goodrich branded, Special Order, Fleet and Commercial tires are excluded from this offer. Not valid in combination with any other discounts or promotions. Offer valid when purchased and installation scheduled online through 3/27/17.

132_60_C750P
Zoom
×
Zoom [+]
  • Part #: C750P|
  • SKU: 115632

Available today after 12 p.m.


    • Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
    • RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes
Retail
$11.99
PayPal available for online purchases. Major credit cards accepted online and in store. Pay online, in-store or take advantage of our Pep Boys credit card. Learn more and see additional details in cart.

BWD Distributor Cap

BWD Distributor Cap
  • Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
  • RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes
BWD is an aftermarket leader, providing a premium line of engine management products. When you purchase BWD, you know you are getting the best engine management technology in the business.

Wire Tower Type
Vertical
Material
Polyester Resin
Distributor Vent
No

115632

BWD Distributor Cap is rated 3.8 out of 5 by 18.
Rated 5 out of 5 by from INSTALL Easy to install.
Date published: 2016-10-11
Rated 5 out of 5 by from perfect fit This Distributor Cap was a perfect fit and looks to be very well made.
Date published: 2016-09-26
Rated 5 out of 5 by from quality Fits right
Date published: 2016-08-11
Rated 1 out of 5 by from Integra Distributor Cap The BWD distributor cap isn't manufactured properly to fit the Integra distributor. The spring loaded post that inserts into the coil doesn't retract far enough. So the cap won't seat on the distributor. Another brand fit perfectly as did the one being replaced.
Date published: 2015-09-05
Rated 4 out of 5 by from Perfect fit Cap was a direct replacment with no fitment issues. I installed a new distributer cap as part of simple tune up on my diaghter's 99 Honda CRV along with spark plus and a rotor. The car runs much better. Price was good becuase of the 35% discount for online purchases along with the free shipping.
Date published: 2015-07-08
Rated 4 out of 5 by from Said to be better material version Fixed P0300 multiple misfire, the old cap ( I think it was a cheap one that come with the car) last only a few month before the spark found it ways between the terminals internally.
Date published: 2015-04-21
Rated 4 out of 5 by from This product is good This product is good
Date published: 2015-03-30
Rated 4 out of 5 by from stock cap good stock cap
Date published: 2014-11-25
Rated 5 out of 5 by from First time Never changed a cap before but it was very easy the retaining screws were weird but normal i guess. Its a screw head long shaft and a hook on the end. When you place the cap right and turn the head the hook hooks under the slot and locks the cap in place. Dont forget to use dielectric and know your firing order.
Date published: 2014-02-14
Rated 1 out of 5 by from Problematic The attachment screws accompanying this cap are coated with some sort of locking compound. The compound makes it difficult to torque the screws. Additionally, the screws seem to be either too long or of an incorrect diameter -- they would not seat the cap on my OEM distributor. The combination of all the above resulted in the distributor boss cracking while trying to seat the cap. Costing me a new distributor. I am an experienced mechanic, this should not have occurred. Not recommended.
Date published: 2013-04-11
  • y_2017, m_3, d_5, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_18
  • loc_en_US, sid_115632, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_pepboys