Rated 4.3 out of 5 by 7
Rated 5 out of 5 by 69 Buick GS Very good
Sprayed just fine, look great!! I would recommend this!
August 27, 2016
Rated 4 out of 5 by SteveSMU Coverage.
Good coverage, no runs, nice finish. Made my new radiator look like it is a stock one.
July 14, 2016
Rated 3 out of 5 by Ryan335is Nozzle needs improvement
I used this to coat the front of my new intercooler last week. The paint itself is not bad. Be aware you must apply 3 to 5 coats for complete coverage. But the real let down is the spray nozzle and the lack of instructions. The nozzle spits and dribbles. On the first one or two passes, paint will dribble on to the work piece, necessitating enough coats to hide them. Paint will also dribble down the nozzle and onto your finger. Be sure to wear a nitrile glove. The can also omits how much time to wait between recoats and doesn't give drying time. Nor does it provide clean up instructions. I found lacquer thinner works ok, as does xylene. I didn't try acetone, but that might work too.
December 8, 2015
Rated 5 out of 5 by another car guy rad
One can did it all, 2 coats, still some left in can. Looks original, THANKS
July 21, 2015
Rated 4 out of 5 by Ursto It painted my radiator. Black!
I was worried at first that one can wouldn't do the job, however I put 3 light coats of this paint on my radiator, and I still have a tiny amount left over. I sprayed it on after I cleaned my aluminum radiator with the Paint-Prep Eastwood can, and it really looks nice! I'm not sure why some of the other reviewers claimed the can clogged. Maybe they failed to flip the can upside-down to clear out any remaining paint in the nozzle, after each use?
July 1, 2015
Rated 4 out of 5 by Hendu99TJ Looks Good
The satin finish looked great. Exactly what I was looking for. The can however dripped and leaked all over my hands.
June 1, 2015
Rated 5 out of 5 by Jesusfrk Eastwood Radiator Black Satin Finish
I bought this after reading all the positive reviews on different forums.I used this to touch up my worn condenser which took a beating from the elements. I followed the directions on the can and it worked perfectly. The key is good surface prep and multiple, light, even coats every 30 minutes until its covered. I used 5 light coats in all, but my condenser was already painted black before. I also didn't drive anywhere for 24 hours so that it could cure. Covered even and there was no effect in A/C performance. I highly recommend this product to everyone. I used the satin finish and it looks great.
November 4, 2014