See Details*

Buy 3 Select Tires, Get the 4th Free Instantly

Close (X)

Buy 3 Select Tires, Get the 4th Free Instantly
Buy 3 Tires, Get 4th Tire Free Instantly. Receive a discount equal to the price of a single tire when four tires are added to the cart. Valid on select in stock tires only. Those tires for which discount is available will be identified in search results & product detail pages. All other tires and special order tires are excluded from this offer. Valid when scheduled for installation on PepBoys.com and installation is completed between 12/1/16 through 12/7/16.


Buy 2 Tires, Get 10% Off
Receive 10% off 2 tires on your online purchase. Use promotional code ROLLOUT10 at checkout to receive discount. This offer cannot be combined with any other offers, coupons or rebates. Valid on select in stock tires only. Those tires for which discount is available will be identified in search results & tire detail pages. All other tires, as well as special order tires, are excluded from this offer. Valid if purchased online or installed by 12/7/16.

3_80_10109Z
Zoom
×
Zoom [+]
  • Part #: 10109Z|
  • SKU: 1067040

Not Available

Pay in Store Available

    • AlumaBlast™ Paint is specially formulated to duplicate the original look of freshly cast aluminum car parts.
    • Protects from rust and corrosion
Sale Price
$14.99
$9.90
PayPal available for online purchases. Major credit cards accepted online and in store. Pay online, in-store or take advantage of our Pep Boys credit card. Learn more and see additional details in cart.

Eastwood Aluma Blast Paint

Apply a protective, durable, aluminum-look finish with AlumaBlast™ Paint. AlumaBlast™ Paint is specially formulated to duplicate the original look of freshly cast aluminum car parts, such as intake manifolds and transmission housings.
  • AlumaBlast™ Paint is specially formulated to duplicate the original look of freshly cast aluminum car parts.
  • Protects from rust and corrosion
  • Acrylic lacquer with low 4-15% gloss
  • Protects up to 300 degrees
  • Can covers 6 square feet
  • Easy application
Restrictions
  • This item must be picked up in the store as it may contain materials which are flammable or corrosive.


1067040

Rated 4.4 out of 5 by 34 reviewers.
Rated 1 out of 5 by aluma blast paint does not match cap and will not dry also looks gold not aluminum December 23, 2015
Rated 5 out of 5 by Excellent product Very good coverage, looks great, pay attention to the directions December 20, 2015
Rated 5 out of 5 by Aluminum look always If your looking to make your aluminum parts like alternators, manifolds etc. look like aluminum but easy to clean and maintain. This is your product. November 9, 2015
Rated 5 out of 5 by Intake I like the look of a Aluma. Intake. SO all the best reviews led me to buy Eastwood Aluma Blast. Believe me it went down just right slow, and the out come was what I was looking for. Now I am looking for the best clear coat out their. One that will not turn yellow when gas lands on it. October 6, 2015
Rated 5 out of 5 by Works as advertised Looks great. Worked as described!!!!!!!!!!!!!!!!!!!!!!! August 10, 2015
Rated 4 out of 5 by satisfied goes on easy and looks like the real thing. How it holds up remains to be seen. July 13, 2015
Rated 4 out of 5 by I really like this paint! I'm a long time user of Eastwood's paints and have been generally be very pleased with the performance of the paints. This is the first time I've used the Aluma Blast and I'm pleased with the results. Color looks great. The part was painted per the recommended instructions and the paint laid down well. June 30, 2015
Rated 5 out of 5 by easy fix Closest thing to new aluminum that I've used so far. PS 30 years in the business. May 3, 2015
Rated 5 out of 5 by Aluma Blast Like most of Eastwoods products, it is the best product to give you that original look for your aluminum items. March 16, 2015
Rated 5 out of 5 by Couldn't be better! I recently purchased this to finalize the restoration of one of my cars and work on the engine bay. I started with the Pre Painting Prep on several aluminum parts (intake, alternatore, head, and transmission.) The Aluma Blast lays down smooth, and gives that perfect fresh aluminum look. February 20, 2015
Rated 5 out of 5 by Great match for fresh cast aluminum I've used Aluma Blast to paint cast aluminum motorcycle engine pieces. It's a dead match for fresh, cast aluminum. If I hold a piece of unpainted cast up to the painted parts, it's hard to tell the difference. Plus, it applies easily and dries fast. Love this stuff! February 2, 2015
Rated 5 out of 5 by This is what you are looking for ! The best ! We use this product all the time on our engine parts. Alternator casings, intakes, water pumps, it brings the finish to new and the product sparkles !!! We combine it with a coat of satin diamond clear and the results are even better. BRAVO Eastwood for giving us great restoration products. November 5, 2014
Rated 5 out of 5 by AlumaBlast paint I bought this paint to use on a restoration project. I painted 4 brackets, all of which were steel, and an aluminum timing cover. Paint lays down nice, great coverage. Found it had a very slight gold cast to it, once dry. Seemed a little odd, but tolerable? I would buy this again, good stuff. May 21, 2014
Rated 5 out of 5 by Great product !! I have seen the Aluma Blast paint used in some automotive magazine articles. I was cleaning up some aluminum brackets and intake manifold for a project I am working on. I didn't like the looks of my parts after I beadblasted them. I bought some Aluma Blast and painted some of the parts I had cleaned up. I am amazed the way the parts turned out. I wish I would have used this paint in previous projects. The paint comes out of the can in a nice, controllable spray pattern. February 9, 2014
Rated 5 out of 5 by Perfect paint for Aluminum I use this paint on everything aluminum that I have to sandblast to clean, nothing works better or lasts longer than this paint. Makes all old aluminum parts look like new. January 17, 2014
Rated 5 out of 5 by Excellent Great stuff, dries quickly, excellent finish, great durability June 18, 2013
Rated 5 out of 5 by Very, Very Good This paint is the absolute closest finish to bead-blasted aluminum there is. No Question. The surface though needs to be prepped well to achieve the best results June 3, 2013
Rated 5 out of 5 by good cosmetic fix I have this high value winter foundry hi rise manifold-wanted to have it ultrasonically cleaned to take it back to a factory look. vendor hasn't yet acquired the unit so i went for this paint job as a quick alternative. straight forward directions, easy to apply-layed down two coats. It covers nicely, even and I hit it with the gloss sealer twice and let it sit. my motorhead buddy stopped by and commented on how good the unit looked. works for me. December 1, 2012
Rated 4 out of 5 by Good Stuff Painted a transmission & intake, looks great. Very accurate representation of raw cast aluminum look. Beware overspray though, silver flecks everywhere. March 25, 2012
Rated 4 out of 5 by Great Can't imagine why anyone would have any problem with this paint. It is just as described. Looks like brand new raw cast aluminum. Have used it on Transmission cases and Aluminum Intakes mainly, it's great paint and most accurate "aluminum look" I've ever ran across. Great stuff. November 5, 2011
Rated 5 out of 5 by eastwood alumablast I put this on my transmission for my 1967 saab incredible finish i highly recommend this product you cant go wrong.. July 9, 2011
Rated 4 out of 5 by Good product I used this product on my 54 chevy tranny case. Nice satin finish. Didn't look like " kentucky chrome". Very pleased. February 26, 2011
Rated 5 out of 5 by great stuff Duplicates raw cast Aluminum perfectly. To add different amounts of sheen you can spray "clear" over it. If you have scratched or gouged surfaces on your aluminum part all you need to do is fill, prime and Aluma Blast over it. No one will ever know it's a coating unless you tell them. January 31, 2011
Rated 4 out of 5 by GREAT PRODUCT Sprayed the gear carrier on my ford 9". The finish is great. Looks like aluminum. Good coverage. Very pleased. Thanks Eastwood!!! October 2, 2010
Rated 3 out of 5 by I liked it I did my intake manifold with Aluma Blast and I thought the paint applied very nicely, and I like the satin look. It is not shiny, which was a plus for me. I prepped the manifold first to sanitary-clean to give the product the best chance for good results. I've not had it on the engine very long, so, hopefully it will hold up. So far... So good! March 12, 2010
Rated 2 out of 5 by Not a great finished look... Put this on the transmission housing of my 68 Firebird... Looks like grey primer. No sheen or luster to this at all. I don't have a good recommendation for another product, but I know that I am not happy with the looks of this paint. You may consider another option. December 19, 2009
  • 2016-12-02 T08:40:14.265-06:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-2, bvpage2n
  • co_hasreviews, tv_34, tr_34
  • loc_en_US, sid_1067040, prod, sort_default
<<prev2