See Details

Up to 66% Off Tire Clearance

Close (X)

Up to 66% Off Tire Clearance
Clearance pricing on select in-stock tires only. Prices will show as marked down with a strike through price. Discount eligible tires will be identified on product detail and search result pages. All other tires, fleet and special order tires are excluded from this offer.

Zoom [+]
  • Part #: 10109Z |
  • SKU: 1067040

Not Available

Pay in Store Available

    • AlumaBlast™ Paint is specially formulated to duplicate the original look of freshly cast aluminum car parts.
    • Protects from rust and corrosion
PayPal available for online purchases. Major credit cards accepted online and in store. Pay online, in-store or take advantage of our Pep Boys credit card. Learn more and see additional details in cart.

Eastwood Aluma Blast Paint

Apply a protective, durable, aluminum-look finish with AlumaBlast™ Paint. AlumaBlast™ Paint is specially formulated to duplicate the original look of freshly cast aluminum car parts, such as intake manifolds and transmission housings.
  • AlumaBlast™ Paint is specially formulated to duplicate the original look of freshly cast aluminum car parts.
  • Protects from rust and corrosion
  • Acrylic lacquer with low 4-15% gloss
  • Protects up to 300 degrees
  • Can covers 6 square feet
  • Easy application
  • This item must be picked up in the store as it may contain materials which are flammable or corrosive.


Rated 4.4 out of 5 by 20 reviewers.
Rated 5 out of 5 by Good Color Match For My Application When the paint arrived the color on the cap did not look like what I wanted but when I used it I was pleasantly surprised. An almost perfect match for my rebuilt alternators. September 18, 2016
Rated 4 out of 5 by intake and transmision housing After spraying this on a new cast aluminum part I find it has a little green tint to it. Needs to be more gray to replicate original cast aluminum. However I don't believe an amateur would ever know the difference. It also freshens up old aluminum pretty nicely. Be careful not to apply in heavy coats causes dark spots to light of coats or to far away makes it more green. It is definitely better than any silver you will find. August 16, 2016
Rated 4 out of 5 by Aluma Blast Porsche Alt housing Having used so many aftermarket productds for close to 50 years,I thumbs up this coating.We beadblasted,denature acohol,soap&water finish,to remove any foreign dust or oils.Adding the aluma blast coatings,I was intitially concerned,because the wet appearance had a cadium look to it.But once currd&dried,24 hrs,it looked natural.I have also have good results,with Diamond Clear topcoats,to act as a dirt &oil barrier.You can easily details with soap and water,and be lookin oem again.Good product Eastwood. August 15, 2016
Rated 5 out of 5 by Love it!! I have been using this on all the cast aluminum accessories on my engine and have had great luck and great results. It really looks like new cast aluminum. beware not to have anything close by that will be affected by overspray as the flakes in this paint like to travel. lite coats seem to work best and seem to go a long way! I bought 3 cans and will probably will use 1-1/2 cans for all the accessories and valve covers. Love this paint!! August 11, 2016
Rated 5 out of 5 by Great Result Follow the instructions and you will be very happy with the outcome! This intake was splattered with gasket material and normal grease from everyday driving. Pressure washed and cleaned then applied the Aluma Blast! Better than new! August 4, 2016
Rated 5 out of 5 by The right stuff! Don't bother with part store paint, the silver will never look right. My race car has typicall part store silver or aluminum hotrod truck has this. It's a big difference. clean it, prep it, shoot it. Have patience and stick to the directions. July 9, 2016
Rated 2 out of 5 by Finish has been changed from the previous purchase I have used this product before and was very happy with its performance and the finish. I was still happy with the performance but the finish does not match the old formulation. The finish is not nearly as smooth and it no longer resembles a shinny Aluminum Finish. June 30, 2016
Rated 5 out of 5 by Great color match. This is not a cheap, gray, rattle-can touch-up. This is a great color match for engine parts. Not wanting to give up my alternator in a 77 Chevy, I removed the unit, carefully cleaned, masked off the wire connectors and hung it by a wire coat hanger. Applied two light coats of Aluma Blast. My buddies think I bought a new alternator. Looks like it. Just make sure you tape off the any wire connections and the pulley grove. December 25, 2015
  • 2016-10-26 T09:42:24.652-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_20, tr_20
  • loc_en_US, sid_1067040, prod, sort_default
2 next>>