Rated 5 out of 5 by THE V Best liquor I ever used
It's the best liquor I have ever used I've been in the car business for 38 years seen and used almost all types of rattle can paints .if you spray over a spot a few days after it blends in and you can't tell . The area must be clean and free of silicone over spray . I cleaned with liquor scuffed raw roll cage metal and chassis parts with out primer it looks like it was sprained with a gun .
January 23, 2016
Rated 1 out of 5 by SoapboxSam No more for me!
Bought three cans of this paint for the engine compartment but when I needed some paint for my bucket seat frames so I decided to use this paint. Sheen is nice but paint is poor. BAD MISTAKE! When I started to install the springs on the frames with over a month of drying time, I found this paint pealing off. I did prime the metal and did what I thought was a good prep before painting but the paint has no strength and can be scraped off with my finger nail. Very poor paint in my opinion.
December 29, 2015
Rated 3 out of 5 by Fuzzy1646 Covers nicely
The product covered nicely and looks good, it dryed fast making it faster to work around. It needs to be more resistant to chemicals and fluids like gas,a drop of gas and the paint bubbles and flakes off even with proper prep work and priming.
July 19, 2015
Rated 4 out of 5 by steelydog Still nothing like it
I haven't had the issues that some have written about. Used it on a carbureted car's air cleaner assembly and I was constantly taking off the air cleaner and setting it aside. The paint held up fine. Have used it on fender wells, wiper arms and even on the under side of some of
my cars and it performs admirably. I continue to use it because it has such a unique silky finish. There's still nothing quite like it.
July 11, 2015
Rated 1 out of 5 by dddkkkald Not happy with underhood black
Have had a problem with Under Hood black. Instructions advise to use between 70 and 90 degrees and 8 to 10 inches away which I have followed, but finish has a uneven sheen with rough appearance. Appears to be a very dry spray, which result in a overspray appearance when applied. If you spray closer to the surface it has an uneven sheen. Have used this product in the past with good results, but recently , that has not been the case. Have switched cans thinking just a bad can but no change.
July 7, 2015
Rated 5 out of 5 by bocoogto Good Coverage, Great Appearance!
I often use this product on inner fenders, radiator support, firewall, and bumper brackets. It covers well, is tough, and looks like factory.
May 6, 2015
Rated 5 out of 5 by Bowties Factory finish
I've used this product on a few restorations and have always been happy with the results. It covers well, gives a consistent "eggshell' finish and dries quickly. It cleans easily once cured with a damp rag with clear water.
May 3, 2015
Rated 5 out of 5 by jwofpr good product
I used it for the first time on my 1968 Mustang firewall and inter fenders, so far I am well satisfied with the product
April 13, 2015