K&N Performance Intake Kit

K&N Performance Intake Kit

  • Part#: 69-7070TB
  • | SKU: 20059648
See all 101 reviews

Available

  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound

K&N Performance Intake Kit

The K&N 69-7070TB Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Nissan 300Z 3.5 Liter V6 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-7070TB cold-air intake consists of a roto-molded plastic intake scoop that mounts behind the 350Z's front fascia directing cooler outside air through free-flowing aluminum tubing into the K&N carbon fiber topped air box. Inside the air box is a black rubber topped K&N high-flow air filter connecting to a mandrel-bent, 3 inch aluminum induction tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The intake tubes have an attractive black powder-coat finish that's made to last. The cold-air intake system accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. The tools needed for installation are a screwdriver, pliers, ratchet set and several wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Free-flowing aluminum tubes
  • Washable and reusable lifetime air filter
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Replaces entire factory air intake system
  • K&N Million Mile Limited Warranty
Restrictions
  • WEB ORDER ONLY!


Product Length 24.1
Contains Toluene? No
Is a Remanufactured Part? No
Is a Hazardous Material? No
Product Width 15.5
Product Height 14.5
Estimated Horsepower Gain 7.67 HP @ 6208 RPM
Air Filter Outlet Shape Round
Clamp Material Stainless Steel
Intake Pipe Ports All intake tube ports needed for the specified applications are included
Couplers Included 1
Air Filter Color Red
Air Filter Large End Diameter 6 in (152 mm)
Air Filter Height 5.563 in (141 mm)
Clamps Included 3
Intake Pipe Color / Finish Blue
Air Filter Material Cotton Gauze
Clamp Style Regular

20059648

  • Description & Features

    .

    K&N Performance Intake Kit

    The K&N 69-7070TB Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Nissan 300Z 3.5 Liter V6 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-7070TB cold-air intake consists of a roto-molded plastic intake scoop that mounts behind the 350Z's front fascia directing cooler outside air through free-flowing aluminum tubing into the K&N carbon fiber topped air box. Inside the air box is a black rubber topped K&N high-flow air filter connecting to a mandrel-bent, 3 inch aluminum induction tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The intake tubes have an attractive black powder-coat finish that's made to last. The cold-air intake system accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. The tools needed for installation are a screwdriver, pliers, ratchet set and several wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

    • Guaranteed to increase horsepower
    • Designed to improve throttle response and engine sound
    • Free-flowing aluminum tubes
    • Washable and reusable lifetime air filter
    • Lasts up to 100,000 miles before service is required (depending on driving conditions)
    • Replaces entire factory air intake system
    • K&N Million Mile Limited Warranty
    Restrictions
    • WEB ORDER ONLY!


  • Specifications

    .
    Product Length 24.1
    Contains Toluene? No
    Is a Remanufactured Part? No
    Is a Hazardous Material? No
    Product Width 15.5
    Product Height 14.5
    Estimated Horsepower Gain 7.67 HP @ 6208 RPM
    Air Filter Outlet Shape Round
    Clamp Material Stainless Steel
    Intake Pipe Ports All intake tube ports needed for the specified applications are included
    Couplers Included 1
    Air Filter Color Red
    Air Filter Large End Diameter 6 in (152 mm)
    Air Filter Height 5.563 in (141 mm)
    Clamps Included 3
    Intake Pipe Color / Finish Blue
    Air Filter Material Cotton Gauze
    Clamp Style Regular
  • Customer Reviews

    .

    20059648

×