CURT MFG Trailer Hitch

CURT MFG Trailer Hitch

  • Part#: 14055
  • | SKU: 30003923
See all 1 reviews

Available

  • Hitch only. Ballmount, pin & clip not included
  • Drilling Required: No
Save 20% on Select Parts & Accessories

CURT MFG Trailer Hitch

When an especially bulky trailer or heavy load requires more towing power, class 4 steps in to take the reins. CURT class 4 trailer hitches are made with all-American steel and a powerful design. They are commonly found on commercial vans and larger pickup trucks and SUVs. This particular class 4 trailer hitch boasts a gross trailer weight capacity of up to 10,000 lbs. and a tongue weight capacity of 1,000 lbs., giving it the raw towing power needed to tow most campers, boat trailers, car haulers and large utility trailers, as well as a winch mount or cargo carrier. It is designed specifically to be a custom-fit trailer hitch for certain years of the Ford E-Series E-150 or Ford E-Series or Econoline E-250 or E-350 (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com).This class 4 features a square tube frame and comes with all necessary hardware for a complete installation on your vehicle. Also, like many class 3 hitches, this class 4 hitch can be used in combination with a weight distribution hitch to increase its overall towing capacity. With a weight distribution system attached, the gross trailer weight capacity increases up to 12,000 lbs. and the tongue weight capacity up to 1,200 lbs. (NOTE: Never exceed the lowest weight capacity of any towing component).Class 4 hitches can accept any ball mount or hitch-mounted accessory with a 2" x 2" shank. Like all CURT trailer hitches, our class 4 line goes through a strenuous finishing process, receiving a shot blast and wash to create a flawlessly smooth surface, and then being co-cured with two finishing coats. A liquid Aquence® coating and gloss black powder coat finish ensure that the hitch stays well protected against rust, chipping and UV damage. This co-cured finish is backed by a one-year warranty, while the hitch as a whole comes with a limited lifetime warranty.

  • Hitch only. Ballmount, pin & clip not included
  • Drilling Required: No
  • Drilling Required: Yes
  • install Time: 35 minutes
  • Visibility: Exposed
Restrictions
  • WEB ORDER ONLY!
CURT is a leading manufacturer and marketer of top-quality towing products. The company offers American-made, custom-fit receiver hitches and wiring harnesses for nearly any vehicle on the road.

Product Length 42
Contains Toluene? No
Is a Remanufactured Part? No
Is a Hazardous Material? No
Product Width 10
Product Height 20

30003923

  • Description & Features

    .

    CURT MFG Trailer Hitch

    When an especially bulky trailer or heavy load requires more towing power, class 4 steps in to take the reins. CURT class 4 trailer hitches are made with all-American steel and a powerful design. They are commonly found on commercial vans and larger pickup trucks and SUVs. This particular class 4 trailer hitch boasts a gross trailer weight capacity of up to 10,000 lbs. and a tongue weight capacity of 1,000 lbs., giving it the raw towing power needed to tow most campers, boat trailers, car haulers and large utility trailers, as well as a winch mount or cargo carrier. It is designed specifically to be a custom-fit trailer hitch for certain years of the Ford E-Series E-150 or Ford E-Series or Econoline E-250 or E-350 (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com).This class 4 features a square tube frame and comes with all necessary hardware for a complete installation on your vehicle. Also, like many class 3 hitches, this class 4 hitch can be used in combination with a weight distribution hitch to increase its overall towing capacity. With a weight distribution system attached, the gross trailer weight capacity increases up to 12,000 lbs. and the tongue weight capacity up to 1,200 lbs. (NOTE: Never exceed the lowest weight capacity of any towing component).Class 4 hitches can accept any ball mount or hitch-mounted accessory with a 2" x 2" shank. Like all CURT trailer hitches, our class 4 line goes through a strenuous finishing process, receiving a shot blast and wash to create a flawlessly smooth surface, and then being co-cured with two finishing coats. A liquid Aquence® coating and gloss black powder coat finish ensure that the hitch stays well protected against rust, chipping and UV damage. This co-cured finish is backed by a one-year warranty, while the hitch as a whole comes with a limited lifetime warranty.

    • Hitch only. Ballmount, pin & clip not included
    • Drilling Required: No
    • Drilling Required: Yes
    • install Time: 35 minutes
    • Visibility: Exposed
    Restrictions
    • WEB ORDER ONLY!
    CURT is a leading manufacturer and marketer of top-quality towing products. The company offers American-made, custom-fit receiver hitches and wiring harnesses for nearly any vehicle on the road.

  • Specifications

    .
    Product Length 42
    Contains Toluene? No
    Is a Remanufactured Part? No
    Is a Hazardous Material? No
    Product Width 10
    Product Height 20
  • Customer Reviews

    .

    30003923

×